August 26, 2026 4 min read

Introducing the New Trolltek™ 40Amp DC/DC Charger with MPPT Solar

Keeping auxiliary batteries charged when you're travelling, towing or out on the water shouldn't require a complicated charging system.

The new Trolltek™ 40Amp DC/DC Charger with integrated MPPT Solar Regulator combines alternator and solar charging into one compact, rugged unit. Designed for 12V battery systems and demanding marine, 4WD, caravan and off-grid applications, it provides an easy way to keep lithium and other auxiliary batteries charged while you're on the move or parked up.


View the Trolltek™ 40Amp DC/DC Charger with MPPT Solar Regulator

Charge From Your Alternator and Solar

A DC/DC charger takes power from your vehicle or boat's charging system and delivers a controlled charging profile to your auxiliary battery.

The Trolltek 40Amp DC/DC Charger goes a step further by incorporating an MPPT solar regulator, allowing both your alternator and solar panels to feed the same charging system.

That means your battery can recharge from the vehicle or boat while the engine is running, then continue taking advantage of available solar energy when you're stopped.

The charger automatically manages the available inputs, with alternator priority as standard, so there's no need to manually switch between charging sources.

Why an Integrated MPPT Solar Regulator?

MPPT stands for Maximum Power Point Tracking.

Rather than simply passing available solar power to the battery, an MPPT regulator continuously monitors the output of the connected solar panel and adjusts its operating parameters to maximise the usable energy available for charging.

This is particularly useful when solar conditions aren't ideal, such as during cloudy weather, changing temperatures or periods of lower light.

The Trolltek charger accepts unregulated solar panels from 9–32V, up to 200W, providing a straightforward way to incorporate solar into a dual-battery installation.

Built for Australian Conditions

Charging equipment installed in a boat, 4WD, camper or caravan can be exposed to water, dust, vibration and significant temperature changes.

The Trolltek 40Amp DC/DC Charger carries an IP68 rating and is designed to withstand harsh marine and off-road environments.

With a compact footprint of just 188 x 127 x 40mm and a weight of approximately 1.28kg, it can also be installed where space is at a premium.

Built-in protection includes:

  • Low-voltage protection

  • Over-voltage protection

  • Over-temperature protection

  • Reverse polarity protection

The charger is also smart-alternator compatible, making it suitable for use with many modern vehicle charging systems.

Designed With Lithium Batteries in Mind

The charger is supplied configured for use with Trolltek LiFePO4 lithium batteries, with charging voltages pre-set to suit the Trolltek lithium range.

It isn't limited to lithium, however.

Selectable charging profiles provide compatibility with:

  • LiFePO4 lithium

  • Standard lead-acid

  • AGM

  • Gel

  • Calcium batteries

This makes the charger suitable for new lithium installations as well as a wide variety of existing auxiliary battery systems.

Smart Multi-Stage Battery Charging

Correct charging is important for battery performance and service life.

The Trolltek charger uses automatic multi-stage charging to manage the battery through the charging process. It delivers high current during the bulk stage, adjusts charging as the battery approaches full capacity, and provides maintenance charging where appropriate for the selected battery chemistry.

The result is a charging system that can be permanently installed and left to manage the battery automatically.

Where Can You Use It?

The combination of 40A DC/DC charging, MPPT solar input and an IP68 enclosure makes this charger particularly well suited to applications where reliable auxiliary power is important.

Typical installations include:

  • 4WD dual-battery systems

  • Caravans and camper trailers

  • Touring and off-grid vehicles

  • Boats and marine battery systems

  • Trolling motor battery installations

  • Portable and fixed off-grid power systems

  • Auxiliary batteries for fridges, lighting and electronics

For boat owners, it provides a practical way to recharge a dedicated lithium battery bank from the vessel's charging system while underway, while also allowing solar to contribute when the boat is stationary.

For 4WD and caravan users, the same principle means the auxiliary battery can recover while driving and continue charging from solar at camp.

Key Specifications

Specification Trolltek™ TTKDC40S
Maximum Charging Current 40A
Vehicle Input 11.5–32V
Solar Input 9–32V, up to 200W
Recommended Battery Capacity 120–400Ah
Battery Types LiFePO4, AGM, Gel, Calcium & Lead-Acid
Charging Automatic multi-stage
Smart Alternator Compatible Yes
Connection Anderson-style plugs
IP Rating IP68
Recommended Fuse 50A
Operating Temperature -20°C to +80°C
Dimensions 188 x 127 x 40mm
Weight 1.28kg

One Charger, Two Charging Sources

For many auxiliary battery installations, combining the DC/DC charger and solar regulator into one unit means fewer components, simpler wiring and less equipment to find space for.

The Trolltek™ 40Amp DC/DC Charger with MPPT Solar Regulator provides a compact solution for keeping auxiliary batteries charged from both the engine charging system and solar.

Whether you're building a lithium-powered 4WD, setting up a caravan for extended off-grid travel or looking for an onboard charging solution for a boat or trolling motor battery, the new Trolltek charger provides both charging sources in one rugged package.

View the Trolltek™ 40Amp DC/DC Charger with MPPT Solar Regulator

Leave a comment